FLUOROELASTOMER PRECOMPOUNDS
Detailed Product Description
| Grade | Polymer properties | Process | Description | |||||||
| Nominal Viscosity ML(1+10)@121 | Specific Gravity | Fluorine Content | Compression | Transfer | Injection | Extrusion | Calendering | Bonding | ||
| BDF201P | 20 | 1.8 | 66 | 0 | 0 | 0 | Fast cure rate,excellent rheology,excellent mold release and good compression set | |||
| BDF275P | 20 | 1.8 | 66 | 0 | 0 | Designed for injection molding gaskets,or extrusion of complicated geometries | ||||
| BDF25P | 25 | 1.8 | 66 | 0 | 0 | 0 | 0 | 0 | Exlellent mold folw,high elongation/tear resistance,for complicated molded parts | |
| BDF25EP | 25 | 1.8 | 66 | 0 | Good property in rolling,improved extrudability,for ex trusion of hoses and profiles | |||||
| BDF25IP | 25 | 1.8 | 66 | 0 | 0 | Good property in processing and rheology.Used for injection of 0 ring | ||||
| BDF25CP | 25 | 1.8 | 66 | 0 | 0 | 0 | 0 | 0 | A general-purpose grade with good property in processing and rheology | |
| BDF30P | 30 | 1.8 | 66 | 0 | 0 | 0 | for compression molding fo 0-ring and gasket or extrusion of complex geometries. | |||
| BDF331P | 30 | 1.8 | 66 | 0 | 0 | High Elongation,good milling characteristic,for complex geometries | ||||
| BDF361P | 30 | 1.8 | 66 | 0 | 0 | 0 | 0 | For injection,transfer or compression molding of oil seals,shaft sealsor valve stem seals | ||
| BDF2602AP | 38 | 1.8 | 66 | 0 | 0 | 0 | A general-purpose grade with good property in processing and moderate cure rate | |||
| BDF401P | 40 | 1.8 | 66 | 0 | 0 | 0 | With excellent prosessing property and low compression set,suitable for compression molding of 0-rings and gaskets | |||
| BDF401HP | 40 | 1.8 | 66 | 0 | 0 | With high tensile strength,for compression molding of 0-rings and gaskets or extrusion of profiles | ||||
| BDF60C | 42 | 1.8 | 66 | 0 | 0 | 0 | Good milling characteristics,for general Purpose | |||
| BDF45P | 45 | 1.8 | 66 | 0 | 0 | 0 | Higher viscosity version of A25P | |||
| BDF601P | 60 | 1.8 | 66 | 0 | 0 | Higher viscosity version of BDF401P,for compression molding of 0-rings and gaskets | ||||
| BDF631P | 60 | 1.8 | 66 | 0 | 0 | Good hot tear resistance and excellent mold release,for compression molding of oil seals or complicated geometries | ||||
| BDT2461I | 26 | 1.86 | 68 | 0 | 0 | 0 | For injection and transfer molding,and extrusion of 0-rings and gaskets | |||
| BDT2461E | 32 | 1.86 | 68 | 0 | Good flowability,mold release,for extrusion molding of profiles and tubes | |||||
| BDT40CP | 40 | 1.86 | 68 | 0 | 0 | Excellent processing properties,for compression molding of 0-rings and gaskets | ||||
| BDT40EP | 40 | 1.86 | 68 | 0 | 0 | 0 | 0 | Good flowability,mold release,for extrusion molding,or compression molding of oil seals and complex geometries | ||
| BDT246-2CP | 46 | 1.87 | 69 | 0 | 0 | With good processing properties,for compression molding of 0-rings and gaskers | ||||
| BDT246-2EP | 45 | 1.87 | 69 | 0 | 0 | 0 | For extrusion molding and comperssion molding of oil seals and complicated geometries | |||
| BDT601P | 60 | 1.86 | 68 | 0 | 0 | With low compression set resistence,for compression or calendering molding of 0-rings and gaskets | ||||
| BDT651P | 60 | 1.86 | 68 | 0 | 0 | With good hot tear resistance,metal bonding preperties,for compression molding of oil seals and complicated geometries | ||||
| BDTL30P | 30 | 1.8 | 66 | 0 | 0 | 0 | 0 | 0 | Improved low temperature resistance,for gaskets,0-ring,etc. | |
| Note:Properties depend on formulation,particularly on filler ratio,This guide is an overview of the existing grades of chenguang FSE.We can tailor grades as per customer's applications and requirements. | ||||||||||
FLUOROELASTOMER PRECOMPOUNDS
Send your message to this supplier
Other Products from this Supplier
See more
FLUOROELASTOMER PRECOMPOUNDS products from this supplier.
Didn't find what you're looking for? Post a buying lead.
Product Showcase[30]
Products
- PTFE PRODUCTS [3]
- FKM RUBBER [1]
- PTFE RESIN [1]
- Coating [16]
- silicone series [8]
- inorganic chemical raw material [3]
- Fluoro fine chemical [7]
- Electronic raw material &Battery [7]
- Function resin [9]
Company Info
J.C. PaoQun (Shanghai) Technology Co., Ltd.
[China]
[Verified Member]
Online Postings: Products, Selling Leads
Business Type:Trading Company, Distributor/Wholesaler
City: shanghai
Province/State: Shanghai
Country/Region : China